To upload a configuration from a backup (configuration) file to a DataMan reader, do the following:
If a DataMan reader has been configured to be on the wrong network subnet, the DMST will not be able to detect and connect to the reader unless the PC system (DMST installed) is connected to the same subnet. There is no way to determine exactly what subnet a DM was configured to be on. If the DM’s subnet is not known, it will need to be factory reset.
To reset the DM back to factory defaults, do the following:
The device should now be factory reset.
GET ACCESS TO SUPPORT & TRAINING FOR PRODUCTS & MOREJoin MyCognex